Thursday, August 10, 2017

Need M25x0.75 Threaded Tube

Suggestions?  1/2" to 1" long.  Unthreaded at one end is fine. .965" ID.

3 comments:

  1. That wall thickness is tough. (My online go-to place for metals only has 2.5 inch tube with at most 0.5 inch wall thickness.)

    You might try finding a machinist who can drill out a piece of 2.5 inch round bar. And then thread the end for you.

    ReplyDelete
  2. I've just been looking for 2M tubes threaded internally for 3/8-16, without much success...

    ReplyDelete
  3. Unknown: That is easy. Just put the tube in a lathe and turn a 3/8"-16 tape into it. If you mail me the tube, I can do that for you very easily.

    ReplyDelete