Tuesday, June 28, 2016

Clever Way to Cut 60 Degree Angle

I need to cut a 60 degree angle with a cutoff saw whose range only goes to 45 degrees.  Any suggestions for techniques?

5 comments:

  1. Cut a 15 degree wedge put against the fence and set the saw for 45

    ReplyDelete
  2. Add a 15° wedge to the face of your 45° guide.

    Cheers

    ReplyDelete
  3. Flip the workpiece over and cut to 30 degrees?

    ReplyDelete
  4. Rich: Interesting idea so obvious that it may not work but worth trying.

    ReplyDelete
  5. Rich: Good idea but this would require putting the workpiece perpendicular to the back fence, so easy way to clamp it down. (I tried.) Time write a slope program for the mill.

    ReplyDelete