I am sure you all remember learning Hooke's Law in physics class (or am I one of the weird ones that still remembered it?)--one of the few really simple equations:
F = -kxwhere F is the force, k is the spring constant, and x is the displacement of the spring under force F. I experimentally verified that when you have multiple springs in parallel, the force is the result of summing the value for k of the different springs. I did this by hanging a .78 kg weight on the end of each of five apparently identical mini-bungee cords from the same package, and putting the other hook over the end of a ruler, then measuring x and then computing k for each.
I was experimenting some variation, but not this much! The values for k in newtons/meter were -92.6, -96.3, -218.87, -343.94, and -343.94. The clumping of the data suggests that in spite of nearly identical appearance, the rubber that is used in these mini-bungees comes from a variety of sources, with the similarities in values suggesting a common origin for the materials used in similar spring rates.
I'm not sure that mini-bungees are going to be useful for my project, because it would take too many of these cords to achieve the desired force, but it was still startling to see the variation in spring rates!
Back when I taught physics we used to have the students measure a bunch of thick rubber bands and metal springs to "verify" Hooke's Law. In the process they learned about variability in measurement and subject material. We always "found" less variability with the springs.
ReplyDeleteIf you can redesign your project to use springs I think you'll find your variability decrease significantly, at least if you get the springs from one company.
Rubber creeps. In other words, Hooke's constant changes based on things like temperature, time since last tension, magnitude of tension, etc. It's not a good material to work with if you need either consistent or predictable forces. I found out the hard way with a project when the teacher gave me a "D" out of pity.
ReplyDelete