Conservative. Idaho. Software engineer. Historian. Trying to prevent Idiocracy from becoming a documentary.
Email complaints/requests about copyright infringement to clayton @ claytoncramer.com. Reminder: the last copyright troll that bothered me went bankrupt.
"And we know that all things work together for good to them that love God, to them who are the called according to his purpose." -- Rom. 8:28
Pages
▼
Monday, April 16, 2018
Electronics Tinkerers
I have the project box.
That little matrix in the bottom--do you locate things like this:
by screwing into the holes at the end of the converter into those little holes? And drill holes in the ends of the case for wires? Or would milling be a better choice?
I suspect that grid at the bottom is just to strengthen it - add more plastic to it.
When I do projects, I drill holes with a drill. A mill would work. If it's too soft a plastic, it will melt around the drill. Ugh. I prefer aluminum boxes, because they don't melt, and they also provide an RF shield.
I suspect that grid at the bottom is just to strengthen it - add more plastic to it.
ReplyDeleteWhen I do projects, I drill holes with a drill. A mill would work. If it's too soft a plastic, it will melt around the drill. Ugh. I prefer aluminum boxes, because they don't melt, and they also provide an RF shield.
Glue for the items inside, drill for the holes.
ReplyDelete