Conservative. Idaho. Software engineer. Historian. Trying to prevent Idiocracy from becoming a documentary.
Email complaints/requests about copyright infringement to clayton @ claytoncramer.com. Reminder: the last copyright troll that bothered me went bankrupt.
"And we know that all things work together for good to them that love God, to them who are the called according to his purpose." -- Rom. 8:28
Pages
▼
Thursday, August 10, 2017
Need M25x0.75 Threaded Tube
Suggestions? 1/2" to 1" long. Unthreaded at one end is fine. .965" ID.
That wall thickness is tough. (My online go-to place for metals only has 2.5 inch tube with at most 0.5 inch wall thickness.)
ReplyDeleteYou might try finding a machinist who can drill out a piece of 2.5 inch round bar. And then thread the end for you.
I've just been looking for 2M tubes threaded internally for 3/8-16, without much success...
ReplyDeleteUnknown: That is easy. Just put the tube in a lathe and turn a 3/8"-16 tape into it. If you mail me the tube, I can do that for you very easily.
ReplyDelete