Imagine a rectangular base about two feet by two feet by two inches thick. I would like to attach a metal bracket at each corner -- held in place by tension. The metal bracket would be essentially a corner that fits on to the bottom of each corner of the base. I could certainly make these corners by bending aluminum or steel, then using a small screw to hold them together. But I suspect that someone already makes something like this: a corner of metal perhaps an inch high or so. Any suggestions on what it might be called?
UPDATE: A reader pointed me to this: a corner brace that is very nearly a perfect match for what I want. I will still need to screw a block to the bottom for mounting the casters, but this is a big step up from having to make it myself.
No comments:
Post a Comment