Pages

▼

Sunday, July 7, 2013

What Would You Call This?

I am looking for a part that is probably quite common, but I don't know what it is called.  It is 1/2" outside diameter, and about .4" inside diameter.  It has a shoulder on one end so that it doesn't slip inside the 1/2" hole into which it fits.  In this case, it is to enable a M10 bolt to fit snugly into a 1/2" diameter hole.  Of course, this is simple enough that I could make it by starting with a 5/8" piece of aluminum, turning most of it down to 1/2", then drilling a hole through the center.  But I am sure that this is a common item -- if I know what it is called!
at

14 comments:

  1. Retired GeezerJuly 7, 2013 at 9:44 AM

    Thread Sert?
    Looks like a pop rivet. You can get the pliers and pieces at Harbor Freight.

    ReplyDelete
  2. MopJuly 7, 2013 at 10:22 AM

    http://www.grainger.com/Grainger/drill-bushings/machine-tool-accessories/machining/ecatalog/N-hg1

    Drill bushing look for one with a shoulder

    ReplyDelete
  3. JimJuly 7, 2013 at 10:43 AM

    Try "bushing" or "adapter".

    ReplyDelete
  4. FidelJuly 7, 2013 at 4:29 PM

    sounds like a bushing

    ReplyDelete
  5. jdunmyerJuly 7, 2013 at 4:37 PM

    I'd call it a flanged bushing, but there's no way I'd even walk to the computer to order one, let alone drive to the store.

    "I have a lathe!"

    And, of course, you do also. :-)

    ReplyDelete
  6. AnonymousJuly 7, 2013 at 5:31 PM

    Just based on your description, I would hazard a guess that would be a "shoulder bushing".

    Something like https://www.pegasusautoracing.com/productselection.asp?Product=3077-050.

    Best of luck!
    Wayne

    ReplyDelete
  7. Doug KlassenJuly 7, 2013 at 6:03 PM

    That sounds like a flanged sleeve or bushing.

    http://www.mcmaster.com/#standard-flanged-sleeve-bearings/=niv9ta

    ReplyDelete
  8. Clayton CramerJuly 7, 2013 at 6:11 PM

    Thanks to all! While I could make it, I hope to use dozens to hundreds of them in the next year or so to satisfy a European market, and some things are more efficient to buy than make.

    ReplyDelete
  9. MauserJuly 7, 2013 at 7:18 PM

    Would a drill the size of an M10 bolt be a better solution for the European market?

    ReplyDelete
  10. Clayton CramerJuly 8, 2013 at 10:04 AM

    I guess that I will make it myself. The various items in question are either intended to handle high RPM (and are therefore somewhat expensive) or made of plastic (which might not survive very long). But I can buy 1/2" steel tubing pretty cheaply, and use that. The head of the M10 x 1.25 bolt will provide the shoulder that I need; I will drill and tap the interior of the tube so that the tube is held in place by the threads.

    ReplyDelete
  11. Windy WilsonJuly 8, 2013 at 1:19 PM

    what you describe, if the inside surface that is .4 diameter had threads it sounds like something I was looking for, and, I kid you not, I was told it was a "sex bolt."

    ReplyDelete
  12. UnknownJuly 8, 2013 at 4:03 PM

    Try flanged threaded insert

    ReplyDelete
  13. MauserJuly 9, 2013 at 2:34 PM

    Um, if you're just using this as a filler, it need not be threaded. Generally, unless you're using jam nuts, you only want one threaded thing on a bolt.

    ReplyDelete
  14. Clayton CramerJuly 9, 2013 at 3:23 PM

    Yes, you are right, it doesn't need to be threaded. There will be a nut on top preventing it from moving.

    ReplyDelete